[Contribution to a book, Contribution to a conference proceedings]
Establishment of an Inline Quality Assurance Method for Fiber Sprayed Preforms
In: SAMPE Conference & Exhibition : conference: May 20-23, 2019, exhibition: May 21-22, 2019, Charlotte Convention Center, Charlotte, North Carolina / editors: Jacob Preston Anderson, Dr. Scott Beckwith, Dr. Andrew Craig Becnel, Dr. Paul Joseph Biermann, Matt Buchholz, Elizabeth Cates, Brian Gardner, Jim Harris, Michael J. Knight, Dr. German Reyes-Villanueva, Stephen E. Scarborough, Phil Sears, James Thomas, Dr. Erik T. Thostenson, 13 Seiten, 2019
[DOI: 10.33599/nasampe/s.19.1400]

Hopmann, Christian
Magura, Nadine
Stender, Sebastian
Schneider, Daniel
Fischer, Kai

[Journal Article]
Methoden zur produktfunktionsgeregelten Fertigung von Composite-Bauteilen : Faserverbundwerkstoffe, Produktionstechnik, Qualitätssicherung : Hybride-Bauteilfertigung mit vorwärtsverketteten Regelkreis
In: wt Werkstattstechnik online, 109 (10), 785-792, 2019

Hopmann, Christian
Stender, Sebastian
Magura, Nadine
Emonts, Michael Gustav
Fischer, Kai
et al.

[Contribution to a conference proceedings]
Pulsed Laser Influence on Two-Beam Laser Metal Deposition
In: Lasers in Manufacturing 2019 : Munich ICM, Internationales Congress Center München, Germany, June 24-27, 2019 : World of Photonics Congress / WLT, LiM 2019, 2019

Bergs, Thomas
Schulz, Martin
Gipperich, Marius
Riepe, Jan
Arntz, Kristian

[Contribution to a book, Contribution to a conference proceedings]
Self-regulated Production of an Automotive Composite Floor Pan
In: SAMPE Conference & Exhibition : conference: May 20-23, 2019, exhibition: May 21-22, 2019, Charlotte Convention Center, Charlotte, North Carolina / editors: Jacob Preston Anderson, Dr. Scott Beckwith, Dr. Andrew Craig Becnel, Dr. Paul Joseph Biermann, Matt Buchholz, Elizabeth Cates, Brian Gardner, Jim Harris, Michael J. Knight, Dr. German Reyes-Villanueva, Stephen E. Scarborough, Phil Sears, James Thomas, Dr. Erik T. Thostenson, 15 Seiten, 2019
[DOI: 10.33599/nasampe/s.19.1380]

Emonts, Michael Gustav
Fischer, Kai
Stender, Sebastian
Magura, Nadine

[Contribution to a conference proceedings, Journal Article]
Adaptive tape placement process control at geometrically changing substrates
In: Procedia CIRP, 85, 207-211, 2019
[DOI: 10.1016/j.procir.2019.09.018]

Brecher, Christian
Emonts, Michael Gustav
Striet, Philipp
Völl, Annika
Stollenwerk, Jochen
et al.

[Journal Article]
Investigation of the influence of melt-impregnation parameters on the morphology of thermoplastic UD-tapes and a method for quantifying the same
In: Journal of thermoplastic composite materials, [1]-14, 2019
[DOI: 10.1177/0892705719864624]

Hopmann, Christian
Wilms, Erik
Beste, Christian
Schneider, Daniel
Fischer, Kai
et al.

[Journal Article]
Funktionsorientierte Fertigung von FVK-Bauteilen
In: Lightweight design, 12 (1), 18-25, 2019
[DOI: 10.1007/s35725-018-0074-3]

Stender, Sebastian
Magura, Nadine
Fischer, Kai
Emonts, Michael Gustav

[Contribution to a book, Contribution to a conference proceedings]
Approaches for increasing process rate of local 3D laser decoating for series production of hybrid composites
In: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VII : 31 January - 1 February 2018, San Francisco, California, United States / Stefan Kaierle, Stefan W. Heinemann (editors) ; sponsored and published by: SPIE, 105250L, 2018
[DOI: 10.1117/12.2290635]

Schares, Richard Ludwig
Schmitt, Stefan Andreas
Emonts, Michael Gustav
Fischer, Kai

[Contribution to a book, Contribution to a conference proceedings]
Improving accuracy of robot-guided 3d laser surface processing by workpiece measurement in a blink
In: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VII : 31 January - 1 February 2018, San Francisco, California, United States / Stefan Kaierle, Stefan W. Heinemann (editors) ; sponsored and published by: SPIE, 1052508, 2018
[DOI: 10.1117/12.2290573]

Schares, Richard Ludwig
Schmitt, Stefan Andreas
Emonts, Michael Gustav
Fischer, Kai
Moser, Rüdiger
et al.

[Contribution to a book, Contribution to a conference proceedings]
Machine Technologies for Thermoplastic Composite Blanks
In: ITHEC 2018 : 4th International Conference & Exhibition on Thermoplastic Composites : 30 - 31 October 2018, Congress Center Bremen, Germany : Conference Proceedings / Editor Hubert Borgmann, P 12, 170-174, 2018

Wendt, Albert
Weiler, Thomas
Emonts, Michael Gustav

[Contribution to a conference proceedings]
Transient spatially resolved irradiation for responding to varying thermal conditions in thermoplastic tape placement
In: [Sampe Conference 18 Southampton], 2018

Striet, Philipp
Weiler, Thomas
Emonts, Michael Gustav
Völl, Annika
Stollenwerk, Jochen
et al.

[Contribution to a book, Contribution to a conference proceedings]
Ausschussfreie FVK-Bauteilfertigung durch Inline-Prozessregelung
In: Kunststoffindustrie 4.0 : 29. Internationales Kolloquium Kunststofftechnik / Herausgeber: Institut für Kunststoffverarbeitung (IKV) in Industrie und Handwerk an der RWTH Aachen, Lehrstuhl für Kunststoffverarbeitung, Prof. Dr.-Ing Christian Hopmann, 207-248, 2018

Hopmann, Christian
Egger, Peter
Beste, Christian
Magura, Nadine
Müller, N.
et al.

[Contribution to a book, Contribution to a conference proceedings]
Tailored irradiation by VCSEL for controlled thermal states in thermoplastic tape placement
In: Laser 3D Manufacturing V : [Proceedings] -, 10523, 2018
[DOI: 10.1117/12.2291015]

Weiler, Thomas
Striet, Philipp
Völl, Annika
Stollenwerk, Jochen
Janssen, Henning
et al.

[Journal Article]
Transient thermal analysis of laser-assisted thermoplastic tape placement at high process speeds by use of analytical solutions
In: Journal of thermoplastic composite materials, 31 (3), 311-338, 2017
[DOI: 10.1177/0892705717697780]

Weiler, Thomas
Emonts, Michael Gustav
Wollenburg, Lukas
Janssen, Henning

[Journal Article]
New potential for composite technologies in buildings and infrastructure
In: JEC composites magazine, 54 (114), 21-23, 2017

Kalt, Lukas
Weiler, Thomas
Emonts, Michael Gustav
Fischer, Kai

[Contribution to a book, Contribution to a conference proceedings]
Hybrid thermoset/thermoplastic composites by using combination technologies including injection moulding
In: SAMPE Europe Conference & Exhibition 2017 Stuttgart : Stuttgart, Germany, 14-16 November 2017 / SAMPE Europe. - Vol. 2, 538-548, 2017

Schmitt, Stefan
Schares, Richard Ludwig
Emonts, Michael Gustav
Fischer, Kai
Henke, Thomas
et al.

[Journal Article]
Hybridisation - a toolbox for efficient lightweight production
In: JEC composites magazin, 54 (111), 40-43, 2017

Fischer, Kai
Emonts, Michael Gustav

[Patent]
Induktiv beheizbares Formwerkzeug, 11 Seiten, 2017

Emonts, Michael Gustav
Werner, Daniel
Janssen, Henning
Steinmayer, Marc
Michelis, Benedict

[Journal Article]
Integrating design and costing
In: JEC composites magazine, 54 (113), 24-27, 2017

Bleck, Katharina
Breiing, Markus
Emonts, Michael Gustav
Fischer, Kai

[Contribution to a book]
Joining techniques
In: Composites technologies for transport applications: A roadmap / Coutellier, Daniel, 83-94, 2017

Buschhoff, Clemens
Emonts, Michael
Brecher, Christian

[Journal Article]
Optimization of the Laser Hardening Process by Adapting the Intensity Distribution to Generate a Top-hat Temperature Distribution Using Freeform Optics
In: Coatings, 7 (6), 77, 2017
[DOI: 10.3390/coatings7060077]

Klocke, Fritz
Schulz, Martin
Gräfe, Stefan

[Contribution to a book, Contribution to a conference proceedings]
On the Use of Flexible Intensity Distributions for Thermoplastic Tape Placement by Means of Vertical-Cavity Surface-Emitting Laser (VCSEL)
In: Conference proceedings : ITHEC 2016 : 3rd International Conference & Exhibition on Thermoplastic Composites, 11-12 October 2016 : Congress Center Bremen, Germany / editor Hubert Borgmann ; published by Messe Bremen, WFB Wirtschaftsförderung Bremen GmbH, Bremen, Germany, 78-81, 2016

Weiler, Thomas
Emonts, Michael Gustav
Janssen, Henning

[Journal Article]
Hybrider Duroplast-Thermoplast-Verbundleichtbau durch Laserscannertechnik : Funktionalisierung von CFK-Strukturbauteilen
In: Lightweight design, 9 (2), 30-37, 2016
[DOI: 10.1007/s35725-016-0009-9]

Würtele, Martin
Emonts, Michael Gustav
Fischer, Kai
Schares, Richard Ludwig
Schmitt, Stefan Andreas
et al.

[Contribution to a conference proceedings]
Optical Modelling of VCSEL-Assisted Thermoplastic Tape Placement
In: [7th European Conference on Composite Material, ECCM17, 2016-06-26 - 2016-06-30, Munich, Germany], 2016

Weiler, Thomas
Striet, Philipp
Emonts, Michael Gustav
Janssen, Henning

[Journal Article]
Infrarotkameragestützte Prozesstemperaturerfassung Laserunterstützte Verarbeitung endlosfaserverstärkter thermoplastischer Tapes
In: wt Werkstattstechnik online, 106 (5), 341-346, 2016

Brecher, Christian
Kukla, Christian
Emonts, Michael

[Contribution to a book, Contribution to a conference proceedings]
Continuous thermoforming of unidirectional fiber reinforced tapes for the manufacturing of 3D lightweight components
In: SAMPE Long Beach 2016 : conference: May 23-26, 2016/exhibition: May 24-25, 2016 : Long Beach Convention Center/Long Beach, California / editors: Scott W. Beckwith (PhD), Robert P. Brushaber, Johnny L. Golden (PhD), Deborah S. Sears, Philip C. Sears ; Society of Advancement of Materials and Process Engineering, 2016

Brecher, Christian
Buschhoff, Clemens
Emonts, Michael Gustav

[Journal Article]
How Industry 4.0 affects the composite production landscape
In: JEC composites, 104, 18-21, 2016

Breiing, Markus
Stender, Sebastian
Emonts, Michael Gustav
Fischer, Kai

[Contribution to a conference proceedings, Journal Article]
Modelling of Indirect Laser-induced Thin-film Ablation of Epoxy for Local Exposing of Carbon Fibers
In: Physics procedia, 83, 1347-1356, 2016
[DOI: 10.1016/j.phpro.2016.08.142]

Emonts, Michael Gustav
Fischer, Kai
Schmitt, Stefan
Schares, Richard Ludwig

[Journal Article]
Die Notwendigkeit ganzheitlicher Optimierung im Leichtbau
In: Werkstoffe in der Fertigung, 3, 7, 2016

Schröder, Kai-Uwe
Fischer, Kai
Emonts, Michael Gustav

[Contribution to a book, Contribution to a conference proceedings]
Integrierte und individualisierte Produktion von FVK-Bauteilen
In: Integrative Kunststofftechnik 2016 : 28. Internationales Kolloquium Kunststofftechnik / Herausgeber: Institut für Kunststoffverarbeitung (IKV) in Industrie und Handwerk an der RWTH Aachen, Lehrstuhl für Kunststoffverarbeitung, Prof. Dr.-Ing. Christian Hopmann, 191-236, 2016

Hopmann, Christian
Krammer, Petra
Fischer, Kai
Hildebrandt, Markus
Fecher, Linus
et al.

[Contribution to a book, Contribution to a conference proceedings]
Intrinsisches Fügen artungleicher, faserverstärkter Kunststoffe, befähigt durch photonische Prozesse
In: Monolithische und hybride Strukturen für den Leichtbau : 7. Landshuter Leichtbau-Colloquium : Tagungsband zum Colloquium ; 25./26. Februar 2015, Hochschule Landshut / Hrsg. Otto Huber; Marc Bicker; Peter Patzelt, 145-155, 2015

Emonts, Michael Gustav
Fischer, Kai
Schares, Richard Ludwig
Schmitt, Stefan Andreas

[Contribution to a conference proceedings]
"Multi-Material-Head" : One tool for 3 technologies: Laser-assisted thermoplast-tape placement, thermoset-prepreg-placement and dry-fiber-placement
In: 20th International Conference on Composite Materials, Copenhagen, 19-24th July 2015 / ICCM ; conference general chair: Professor Ole Thybo Thomsen, Aalborg University, Department of Mechanical and Manufacturing Engineering, P101-8, 8 Seiten, 2015

Brecher, Christian
Werner, Daniel
Emonts, Michael Gustav

[Contribution to a book, Contribution to a conference proceedings]
Cost-effective high speed production of multi-material components by selective tape placement
In: ICCST/10, 10th International Conference on Composite Science and Technology : 2-4 September 2015, Instituto Superior Técnico, Lisboa, Portugal / A.L. Araújo, J.R. Correia, C.M. Mota Soares, et al. (Editors), 11 Seiten, 2015

Brecher, Christian
Peters, Tido
Emonts, Michael Gustav

[Journal Article]
Elektrostatische Greifersysteme für den Leichtbau : Formflexible und flächenselektive elektrostatische Greifersysteme für Hochleistungsmaterialien
In: wt Werkstattstechnik online, 105, 567-572, 2015

Brecher, Christian
Kukla, Christian
Schares, Richard Ludwig
Emonts, Michael Gustav

[Contribution to a conference proceedings]
Form-adaptive gripping system for light-weight productions
In: 20th International Conference on Composite Materials, Copenhagen, 19-24th July 2015 / ICCM ; conference general chair: Professor Ole Thybo Thomsen, Aalborg University, Department of Mechanical and Manufacturing Engineering, P101-15, 9 Seiten, 2015

Brecher, Christian
Kukla, Christian
Schares, Richard Ludwig
Emonts, Michael Gustav

[Journal Article]
Leichtbau-Produktion mit flexibler Anlagentechnik : Multifunktionales Tape- und Fiber-Placement-System zur Fertigung faserverstärkter Komponenten
In: wt Werkstattstechnik online, 105 (9), 586-590, 2015

Brecher, Christian
Emonts, Michael Gustav
Werner, Daniel

[Contribution to a book, Contribution to a conference proceedings]
Mass customization of high performance composites with low investment costs
In: Conference papers / APT '15, 11th International Conference Advances in Plastics Technology, Sosnowiec, 13 - 15 October 2015 / Instytut Inżynierii Materiałów Polimerowych i Barwników, Oddział Farb i Tworzyw w Gliwicach. [Ed.: Anna Pająk], 2015

Brecher, Christian
Emonts, Michael Gustav
Buschhoff, Clemens
Janssen, Henning

[Contribution to a book, Contribution to a conference proceedings]
Unidirectional fiber reinforced tapes as energy director for the ultrasonic welding of thermoplastic composites
In: Proceedings SAMPE Europe Conference 15 Amiens : 15th-17th September, Amiens, France : first conference and exhibition : fall conference, 8 Seiten, 2015

Brecher, Christian
Buschhoff, Clemens
Emonts, Michael Gustav

[Journal Article]
Energiekosten mehr als halbiert
In: Technische Rundschau, 107 (2), 41-43, 2015

Brecher, Christian
Werner, Daniel
Emonts, Michael Gustav
Steinmayer, Marc

[Journal Article]
Mikro-Profile aus Faserverbundkunststoffen : MRT-sichere Produkte für die Medizin von morgen
In: VDI-Z integrierte Produktion, 157 (1/2), 71-73, 2015

Brecher, Christian
Emonts, Michael Gustav
Wasiak, Christian

[Journal Article]
Effizient zum Interieur
In: Werkzeug & Formenbau, 23, 60-62, 2014

Brecher, Christian
Emonts, Michael Gustav
Werner, Daniel
Steinmayer, Marc

[Contribution to a book, Contribution to a conference proceedings]
Flexible & automated production of composite parts
In: [16th European Conference on Composite Materials, ECCM16, 2014-06-22 - 2014-06-26, Seville, Spain], 2014

Brecher, Christian
Emonts, Michael Gustav
Kermer-Meyer, Alexander

[Journal Article]
Modulares und laserunterstütztes Tapelegesystem : Multi-Material-Head
In: Lightweight design, 7 (4), 50-55, 2014
[DOI: 10.1365/s35725-014-0399-5]

Werner, Daniel
Emonts, Michael Gustav
Brecher, Christian

[Contribution to a book, Contribution to a conference proceedings]
Production of customized hybrid fiber-reinforced thermoplastic composite components using laser-assisted tape placement
In: New production technologies in aerospace industry : proceedings of the 4th Machining Innovations Conference, Hannover, September 2013 / ed.: Berend Dekena, 123-129, 2013
[DOI: 10.1007/978-3-319-01964-2_17]

Brecher, Christian
Emonts, Michael Gustav
Stimpfl, Joffrey
Kermer-Meyer, Alexander

[Patent]
Verfahren zum Betrieb einer Greifvorrichtung sowie elektrostatische Greifvorrichtung, 9 Seiten, 2014

Brecher, Christian
Emonts, Michael Gustav
Ozolin, Boris
Werner, Daniel

[Patent]
Verfahren zum Betrieb eines elektrostatischen Partikelsammlers, elektrostatischer Partikelsammler sowie Partikelsammelsystem, 17 Seiten, 2014

Bremer, Jan
Emonts, Michael Gustav
Ozolin, Boris
Werner, Daniel

[Contribution to a book, Contribution to a conference proceedings]
Automated Manufacturing of Fiber-Reinforced Thermoplastic 3D-Lightweight Components
In: Future trends in production engineering : proceedings of the First Conference of the German Academic Society for Production Engineering (WGP), Berlin, Germany, 8th-9th June 2011 / Günther Schuh ... eds., 2013
[DOI: 10.1007/978-3-642-24491-9_16]

Brecher, Christian
Emonts, Michael Gustav
Dubratz, Markus
Kermer-Meyer, Alexander

[Contribution to a book, Contribution to a conference proceedings]
CO2-laser-assisted processing of glass fiber-reinforced thermoplastic composites
In: High power laser materials processing: lasers, beam delivery, diagnostics, and applications II : 5 - 7 February 2013, San Francisco, California, United States ; [part of SPIE photonics west] / sponsored and publ. by SPIE. Friedhelm Dorsch, ed., 8603 OH, 2013
[DOI: 10.1117/12.1000243]

Brecher, Christian
Emonts, Michael Gustav
Stimpfl, Joffrey
Schares, Richard Ludwig

[Contribution to a book, Contribution to a conference proceedings]
CO2-laser-assisted production of hybrid fiber-reinforced thermoplastic composites
In: International Conference on Composite Materials 2013 : (ICCM-19) ; Montreal, Quebec, Canada, 28 July - 2 August 2013 / [organized by Canadian Association for Composite Structures and Materials (CACSMA)]. Ed.: Suong Van Hoa, 2013

Brecher, Christian
Emonts, Michael Gustav
Stimpfl, Joffrey

[Journal Article]
Economic production of load-optimized thermoplastic composites
In: JEC composites, 50, 64-67, 2013

Brecher, Christian
Emonts, Michael Gustav
Kermer-Meyer, Alexander
Janssen, Henning
Werner, Daniel